Skip to content

Play After Dark

Court Lighting & Fencing in Richmond

A fully lit, properly fenced court that meets county code and lets you play long after sunset.

  • On-Site Evaluation
  • Itemised Estimate
  • County Code Covered
  • Final Walkthrough
A tall light pole with multiple large floodlights arranged in a circular pattern against a clear blue sky.

What Goes Wrong

The mistakes that turn a lighting or fencing job into a costly redo

Cutting corners on layout and code compliance creates problems that are expensive to fix after the surface is poured.

Poles Added Late

Setting light poles after the court surface is finished means cutting into it, disrupting drainage and voiding the surface warranty.

Footings in the Sub-Base

Pole footings are placed during the sub-base phase, so no finished surface is cut and drainage stays intact.

Wrong Setback Distance

Fencing installed at the wrong setback for your county or HOA can trigger a removal order and full reinstallation at your cost.

Setback Confirmed First

The correct setback distance for your site is identified and written into the estimate before the fence contractor is scheduled.

Uneven Lux Coverage

Poles spaced by guesswork leave dark patches at the baselines, making the court unsafe and unusable for evening play.

Calculated Fixture Spacing

Pole height and fixture spacing are calculated to deliver even lux coverage across the full court surface before any pole is ordered.

No Inspection Sign-Off

Electrical work that skips the county inspection step can fail a future property sale or leave you liable for code violations.

Code Inspection Included

All wiring is completed to the applicable county inspection standard, and the final walkthrough confirms sign-off before the job closes.

How It Works

Lighting and fencing scoped to county code and court dimensions

Pole placement and lux levels need to be planned before the court surface is poured, not retrofitted afterward.

Request an Estimate

LED sports lighting requires pole footings set in concrete before the surrounding surface is finished. Positioning poles after the court is poured means cutting into the finished surface and risking drainage disruption. We include lighting layout in the initial site plan so footings are placed during the sub-base phase at no extra excavation cost.

Fencing setbacks vary by county and by whether the court sits inside an HOA community. The scope identifies the correct setback distance for your site and specifies post depth, gauge, and coating, chain-link or vinyl-coated, before the itemised written estimate is produced. That prevents change orders when the fence contractor arrives.

Light pole height and fixture spacing are calculated to deliver even lux coverage across the full court surface. The final walkthrough checks that illumination is consistent, fencing gates open and latch correctly, and all electrical work meets the applicable county inspection standard before the project is signed off.

Why Us

Why Richmond Sports Courts for lighting & fencing?

Code compliance and upfront scoping are built into every job, not offered as optional add-ons.

Scoped Before the Surface Is Poured

Lighting and fencing are planned at the start, so no finished surface is cut and no cost is added later.

Itemised Written Estimate

Poles, footings, fencing, and wiring appear as separate line items so you see exactly what each element costs.

Three-County Code Knowledge

Chesterfield, Henrico, and Goochland setback and inspection requirements are applied to your specific site from day one.

Free On-Site Evaluation

Every enquiry starts with a site visit to assess space and drainage before any scope or price is put in writing.

Final Walkthrough Before Sign-Off

Illumination levels, gate operation, and electrical inspection are all confirmed before the project is considered complete.

A large grey luxury house with a stone chimney and wide porch, overlooking a perfectly manicured lawn and a newly built grey and blue sports court.
Finished regulation tennis court with acrylic surface and crisp white line striping backyard

The Process

From first call to first night game

Request an Estimate

  1. 01

    Evaluate the Site

    We arrange an on-site visit to assess space, drainage, and county setback rules before any scope is written.

  2. 02

    Deliver a Written Estimate

    You receive an itemised estimate listing pole footings, fencing spec, fixture count, and wiring as separate cost lines.

  3. 03

    Install & Inspect

    Local builders complete the installation, and a final walkthrough confirms lux levels, gate function, and county inspection sign-off.

Pricing Estimates

Typical Court Lighting & Fencing Prices

JobTypical cost
Basic court fencing$5,000-$12,000
Standard court lighting$6,000-$15,000
Full fencing and lighting package$12,000-$30,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about court lighting & fencing in Richmond

  • Can lighting be added to a court that is already built?

    It can, but it costs more. Adding poles after the surface is finished requires cutting into it to set footings, which risks cracking the surface and disrupting drainage channels. Planning lighting before the sub-base is poured avoids that extra excavation and keeps the surface intact.

  • What fencing material is right for a backyard court?

    Chain-link is the most common choice for residential courts because it is durable and low maintenance. Vinyl-coated chain-link adds a cleaner appearance and resists rust longer. The gauge and post depth are specified based on your site conditions and county requirements, not a one-size default.

  • How close to the property line can the fence be installed?

    Setback distances differ by county and by HOA rules. Chesterfield, Henrico, and Goochland each have their own requirements. The correct distance for your specific site is confirmed during the on-site evaluation and written into the estimate before any fence contractor is scheduled.

  • Does the electrical work need a county inspection?

    Yes. All wiring for court lighting must meet the applicable county inspection standard. We arrange local builders who complete the work to code, and the final walkthrough confirms inspection sign-off before the project closes. Skipping this step can create liability issues and complications at resale.

  • How many poles does a standard backyard court need?

    Pole count depends on court size, pole height, and the fixture output needed to hit even lux coverage across the full surface. A typical single-court installation uses four poles, but the layout is calculated for your specific dimensions rather than applied as a standard template.

  • What happens if I delay adding fencing after the court is built?

    An unfenced court is a liability risk, and adding fencing later often means working around a finished surface and landscaping. Post holes dug near the court edge can undermine the base if drainage was not designed with fence posts in mind. Scoping fencing at the start avoids both problems.

More questions about Court Lighting & Fencing?

Tell Us Your Site & Sport

Share the location and intended use, and we’ll arrange an on-site evaluation with a written estimate covering every cost category.

Request an Estimate